August 1, 2020
Description
This is simple shower holder. It has conical hole, so when you straight it up - it is loosen and allow easily move it up and down. But when shower is inserted into the holder and press down the arm, the extra force is applied to the tube because of a cone, and it is enough to hold up the wheigh of the shower.
It fit 22mm tube. The holder has 29 degrees incline and 23mm hole for the shower head and 15mm hole for the hose.
I did use PLA filament, PETG will work well too. But if you use ABS or NYLON - it will lessen all the dimension.
No supports where used, infill 10%.
License:
Creative Commons - Attribution
molnija3d
