Ortur Master 2 Air Assist

Simple rear mounted air assist for the Ortur Master 2.

The mounting bolts can be re-used on the fan mount, but you will require a 12v 50x50x15mm blower fan and a couple 25mm bolts and nuts to fit it. The stock mounting bolts are just barely long enough with a tight fit and you wont use the stock washers.

I ran a separate cable with a different 12V source, but have heard of others tapping directly into the laser power.

The short fan shroud works with the stock laser setup. The long one is for another mount I was using, but I made it available in case someone wanted to try it.

There is also a dual fan mount setup. This will fit 2 fans with a ~35-40mm pair of bolts and 2 fan shrouds.