DinoGenics w/ Controlled Chaos Board Game Organizer

Update: I modified the dino holding boxes so that the Controlled Chaos board will now fit snuggly against the Chaos dino box. It was bugging me that it was tilted a bit. V2 files are the correct ones.

This is a modification of my DinoGenics insert so that the Controlled Chaos expansion fits.

Some of the pieces are the same, but most are modified and a few new, so I figured it was easier if I just made a new entry for it.

The ControlledChaosBox,stl should hold all of the expansion stuff except the cards, the facilities, and the elite dinos. Check out the screen shots for where stuff goes. It was so tight I couldn't even fit labels for the dino boxes.

Facilities Box:
This no longer holds the bag full of buildings, as there wasn't enough room with the new double-wide buildings. Instead there is a slot for the Hotels like before, opposite the hotels are the Controlled Chaos buildings to add if you're playing the expansion, and between them are the Synth buildings and crash sites. These are all labeled on the outside. The big buildings lay on the bottom of the box, and a tray with the rest of the buildings goes on top of that, with the bag folded on top of that tray.

Some of the trays on the left side of the box are intentionally higher than the right side, so that when you're putting the game away, there is room on the right side for the Controlled Chaos board (see screenshot). Unfortunately the Chaos box is a little big so it doesn't fit perfectly, but the box still closes.

Printing Notes:

• THIS WILL NOT FIT SLEEVED CARDS Sorry sleevers, I really tried, but couldn't get it to fit. This expansion almost doubled the card count, and did double the dinosaurs.

• If you had the old insert, the files that aren't physically changed are:
  WorkerSingle.stl
  WorkersAll.stl
  CardsTall.stl (This was just Cards.stl previously, but it's the same specs)

Everything else is modified or new and will need to be printed.

If you didn't have the old insert:

• Print one of everything, except the WorkerSingle, which you print 5 times.