Mask Case

I created a simple case to store fabric face masks between uses (the mask I used as a template is about 180mm long and 85mm wide with the straps at the very edge).

The two earlier designs use a cantilever to lock the lid shut. I later switched to a version held closed by magnets to make it easier to open and close. Both designs are uploaded with corresponding names.

The magnet cases use 5 mm x 5 mm cube magnets in the base of the case and 6 mm diameter disc magnets with a height of 1 mm in the lid.

These are just the magnets I had lying around, other magnets would surely also work fine.

UPDATE: A print-in-place version of this case can be found here: https://www.thingiverse.com/thing:4770404