Yukine Chris' Billion-maiden

Yukine Chris's Billion-maiden from Symphogear, according to her 1/7 scale Figure. Made using Inventor Pro.

I sliced it up so it would fit on an Ender 3 (Pro) at 700% scale, the connecting parts should be scaled up to 690% so they fit.
All parts should open in the correct orientation.

The parts are split into 3 clusters:
1-Handle
2-Main Body
3-Barrels

Here is a list a for the quantity of the parts:

QTY	ITEM
2	3-1
2	3-2
2	3-3
2	3-4
2	3-connector-1-1
2	3-connector-3-3
4	connector-cluster-2-3
6	pipe-connector
12	pipe
16	small connector

All other parts have to be printed only once.
Connecting all the parts should be self-explanatory, i used superglue for plastic.
I made mine using 0.8mm wall thickness, if you want to sand it down you might want to make it a bit thicker.

The end product is pretty stiff, but the handle might be too weak to carry it around, so if you want to be able to use it, you would have to change the parts where the handle and the main body connect.


Gallery with more pictures: https://imgur.com/gallery/EXemGBV
Watch Symphogear :)