Anycubic Mega X X-Carriage Upgrade / MK4 Remix

#Anycubic Mega X X-Carriage (MK4 Remix)

##Assembly guide:
https://www.youtube.com/watch?v=T7SVuvIMS-A

##UPDATE: Added V6 Hotened Version

##Partlist:

17x M3x10 Cylindrical Head Screw ISO 4762
4x M3x16 Cylindrical Head Screw ISO 4762 (You get those from the original x-Carriage)
1x M3x25 Cylindrical Head Screw ISO 4762
15x M3 Hex Nut ISO 4032
3x M3x20 Female Threaded Standoff Spacer SW6
3x M5x20 Round Head Screw ISO 7380
3x M5 Hex Nut ((You get those from the original x-Carriage)
1x 1mx6mm Belt (original belt is to short)

##Electronics:
1x Radial Cooling Fan 5015
1x Axialfan 4010

#Printing:

###X-Carriage:
Layer height: 0,2mm
Infill: 20%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 0,8mm
Support: yes (everywhere)
Bed adhesion: Brim / Skirt

###CarrierplateV5:
Layer height: 0,2mm
Infill: 20%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 0,8mm
Support: no
Bed adhesion: Brim / Skirt
NO PLA!

###Fanduct:
Layer height: 0.2 mm
Shell thickness: >10 mm
Line orientation: concentric
Support strucutre: No
Bed adhesion: Brim (In- and outside min. 6 lines)
Z-seam: Aligned X=0,Y=0
CURA specific:
- Combing deactivated
- Fill gaps between walls deactivated
NO PLA!

###CoverplateV5:
Layer height: 0,2mm
Infill: 20%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 1,2mm
Support: no
Bed adhesion: Brim / Skirt
NO PLA!

###Rearbracket:
Layer height: 0,2mm
Infill: 100%
Shell thickness: 1,2mm
Support: yes (touching buildingplate)
Bed adhesion: Brim / Skirt

###Belttensioner:
Layer height: 0,2mm
Infill: 100%
Shell thickness: 1,2mm
Support: no
Bed adhesion: Brim / Skirt

###Middleplate:
Layer height: 0,2mm
Infill: 20%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 0,8mm
Support: yes
Bed adhesion: Brim / Skirt

###Pulleyframe:
Layer height: 0,2mm
Infill: 25%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 0,8mm
Support: no
Bed adhesion: Brim / Skirt

###Rearplate
Layer height: 0,2mm
Infill: 20%
Shell thickness: 1,2mm
Top thickness: 1,2mm
Bottom thickness: 0,8mm
Support: yes
Bed adhesion: Brim / Skirt

###AI3M-Letters:
Layer height: 0,2mm
Infill: 100%
Shell thickness: 1,2mm
Support: no
Bed adhesion: Brim / Skirt

###X-Endswitchmount:
Layer height: 0,2mm
Infill: 100%
Shell thickness: 1,2mm
Support: yes
Bed adhesion: Brim / Skirt

##The Fanduct hits the original Endswitchmount so it has to be replaced by a redesigned printed version.

#The direction of the X-Stepper has to be inverted before turning the printer on again!