Tamiya Grasshopper II - Wheel + Rim (no glue needed)

A set of Rims + Wheel for the Tamiya Grasshopper II (would probably pass on other....)
the 2 small holes near the 4mm Hole are for M2 screws, they go in the holes on the shaft to hold the rim tight while tightnening

Rim - printed in PLA with 20% (100% where the holes )
Whell - printed in TPU with 10% infill with triangle infill

This time you don't nede to glue the wheel to the rim, because the rim is made out of 2 pieces which screw together and squeeze the wheel in between them, and its much easier to repair or replace the parts, the 2 rims parts are screwed together with 4 x M3*16mm bolts

   I added 2 types of wheels:

Large wheel - SAND wheels
gonna need the large rims
- Jante grasshoper - new - back
- Jante grasshoper - front - big

Small wheel - ROAD / OFFROAD wheels
gonna need the small rims
- Jante grasshoper - new - back
- Jante grasshoper - front - small