Gloomhaven: Jaws of the Lion Palisades

My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book and it looks to me like you'll want to print 2 of the larger one, and 2 of the 1-hex one. I only saw two scenarios that need palisades (the first that needs 2 of the 2-hex wide ones, and a later one that needs 3 hexes of palisade), but another scenario had a bunch of broken down boxes that looked like they were being used as an improvised palisade, so I figure that I'll use these in that scenario, too. That one will need all 4 of the pieces that I mentioned.

This should print without any supports; I did mine on a Prusa MK3 with a .25 mm nozzle and am very please with the results. Also, they're quite sharp and I expect they'd make excellent caltrops, so don't leave them on the ground where someone might accidentally step on them!

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons athttps://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!