Rc Bodyshell -GTA V- BF Injection 313mm

Hi! This time i'm sharing something more easy to build. It's a car from GTA V.
I've spent 7 full days working on the files, fixing the mesh, making it printable so please take a look at my video and leave a like on Youtube if you want to support me.
Cheers!

Please read:

All parts are designed to fit 220mm printers but make sure your printer is well calibrated and centered because the bodyshell will use the whole bed width.

If you are not able to slice the part, your Brim, Raft or Squirt is probably too large and exceed the print bed. Try to reduce them in your settings.

For CR10 users (or equivalent printers) you can try the "1part" file. Not tested yet but it fits in those printers and should work.

Total print time is about 60hours.

Total weight is less than 300g.

recommended settings:
Material: ABS
Supports: ON
Brim: 3mm
Speed: 50mm/s
Wall thickness: 1.6mm
Infill: 50%

Post processing recommandation:
wet sand at 90, (most important step is here, remove all the layer lines)
wet sand at 400,
apply putty filler on the gaps (between the 2 main parts)
wet sand the gaps area.
apply primer,
wet sand at 1000,
Paint.

Works great on 313mm or 300mm wheelbase chassis.

Please support my Youtube channel:
https://www.youtube.com/user/Meuh974/videos

You can donate here:
https://www.paypal.com/donate/?hosted_button_id=C56ZSQRJTMU2E