Filament Dry Box - Form XAGO box, 20mm shaft

Parts to construct a drybox with the "form" series of boxes, purchasable at B&Q in the UK. This uses a Medium sized XAGO form box and lid. The shaft is a repurposed 20mm piece of tube from an old mop handle.

Inspired by Thomas Sanladerer: https://www.youtube.com/watch?v=OY5n9q-wS7k

Humidity results are here: http://designingoverload.com/2020/09/16/dry-box-for-sensitive-filament/

You'll need:

• 1x box + lid, with the blue lid clips broken off.
• 1x 20mm shaft, cut to length
• 2x hose attachments and appropriate nuts for the other side (mine were M5)
• 1x humidity monitor (optional)
• 1x coil of 5mm foam window seal [bought at B&Q].
• Plenty of silica gel beads to fill the bottom. I used around a kilo, and got the kind that start orange and turn green when wet [from ebay].

Printing:

• 2x Shaft holder. (scad file included if your shaft is a different dia)
• 4x box clips
• 1x humidity monitor mount

Tools:

• hot glue gun
• 5mm drill bit and something to drill with [I used a hand drill for precision]