Wheel truing stand for big tires

Bike wheel truing head to be mounted however you like (I will add mounts in the future) the hole spacing on the back plate is 30mm x 4mm. Made for wide MTB rims and plus size tires and will probably work fine for the fatties and roadies too.

you will need:
4x 4mm x 18mm bolts and nuts
4x washers to fit the above bolts ~1mm thick to act as bushings for the arms
1x 1/4" course thread bolt 2 1/4" long or longer
1x 1/4" nut
1x spring or rubber band

Print:
2 of the arms in the stiffest material you have with thick walls.
and one of each of everything else.
Refer to the pictures for the rest.

The boost adapters are to be used if you want to true a front boost wheel in place of a rear wheel. I used the back half of a crashed stand as a frame.