Scrap Warkopta

My first design for Thingiverse! :-)

The blaster gun is designed to fit 1,75mm filament as wires! so just cut your spare filament and heat it with a hair dryer to get the "hanging wire" look!
(Optional: use filament from your bowden extruder to get a "corrugated tube" look ;-) )

There are two scalings of the Bomms:
"big bomms" and "bomms"

• "bomms" fit with the flyer base
• "big bomms" if you don't use the flyer bas.

Two parts are with build in brim for better adhesion (had some serious trouble with printing them):

• "WarKopta_RotorSmall06.stl"
• "WarKopta_RotorBig06.stl"

If you print those, just cut the brim with a sharp knife as usual. I also added a "noBrim" version.

25.09.2020: EDIT:

• "WarKopta_WorkyBitz01.stl" fixed to fit "WarKopta_WorkyBitz03.stl"

26.09.2020: EDIT:

• Completed model added
• Explosion model added
• "WarKopta_RotorSmall06_NoBrim.stl" added
• "WarKopta_RotorBig06_NoBrim.stl" added

29.09.2020: EDIT:

• "Warkopta_Skids04.stl" glitch fixed ("diagonal cut")

If you like the model, I would appreciate a like, comment or a small tip! :-D