Macro Knob and Keyboard

This is a remix of vmensik's VM's macro keyboard.

I didn't really like the rough look on the top so the model was completely redesigned to remove the ridge around the knob so that it can be printed top down without supports.

The key holder tray was also removed in favor of mounting the keys directly into the case.

A cable strain relief, a place for a micro usb port, and a slide switch were added for more connectivity options. The slide switch was added to enable switching between macro profiles.

All of the source files are uploaded so feel free to add/remove these features or to change screw hole sizes and tolerances.

Arduino Sketch and more source files can be downloaded here:
https://grabcad.com/library/macro-knob-and-keyboard-1

Note: if using the usb port it must be mounted upside down as shown in image.

Parts needed:

1x Arduino pro micro (or another microcontroller capable of usb hid) (https://tinyurl.com/yc8avrmz)
8x Cherry MX switches (https://tinyurl.com/yby4mj43)
1x Rotary Encoder (KY-040) (https://tinyurl.com/y7mjhef2)
5x Phillips Flat Head Screw 6-32 Thread Size, 5/16" Long (91771A145 @ McMaster-Carr) (Max. screw length 12mm)
2x Pan Head Phillips Screws M3 x 0.5mm Thread, 6mm Long (92000A116 @ McMaster-Carr) (Max. screw length 8.5mm) (4x needed if using usb port)
1x Slide Switch (https://tinyurl.com/yccxwe2o)
1x Micro usb port (https://tinyurl.com/y69gegnk)