Conveyor belt mudgaurd

Here's my Conveyor belt rear mud guard for Tamiya's 1/14 scale American trucks. Its designed to be printed in two pieces and glued together with CA glue with an accelerator. Mirror the pieces in your slicer to get opposite side. This will bolt straight up to a Globeliner. For the King/Grand hauler two holes will need to be drilled and tapped m3 for the front mounts although you can use a single bolt in the existing hole that the quarter guard was bolted to. I used 1.5 thick rubber for the belt and 2mm bolts and nuts to fix the rubber in place. The tail lights will take Tamiya's standard rectangle lenses. I have included a hole that lines up with one of the original rear mud flap bolt holes that the wires for the tail light lenses can be passed through. The builder will have to arrange a cover for the wires inside the guard. Arrange the parts on the bed as shown in the photo. Use supports.