Filament Box Remix with Filler Spool Holder

Split version - I split the V2 box and lid into 4 separate stl files so that it can be printed on smaller printers. You will just need to glue the pieces together. Version V2 - This version uses a custom Filler spool holder. I added 28mm to the depth of the box to fit the new Filler on this version. I looked at reducing the Filler width, but I decided not to because of all the different size spools that are out there. Version V1 - I added 45mm to the depth of the box to fit the Filler spool holder. Also added a custom mount for the Filler spool holder. This version uses the original Filler if you don't care about the extra box depth. I added the two STL files for the parts that I modified. The rest of the parts are unchanged from the original designs. Help support my designs by using the affiliate links below. Bearings for the spool holder: Amazon Link or AliExpress Link M3 x 40mm Screws: Amazon Link or AliExpress Link M4 x 8mm Screws: Amazon Link or AliExpress Link