September 28, 2020
Description
These parts will mount a Google Pixel 2 (in bumper case) to the 12mm bar above the instrument panel on a 2021 Yamaha Ténéré. In addition to the printed parts, the following parts are required:
2 x M5 x 30mm bolts
2 x M5 nuts
4 x M4 x 8mm bolts
Pixel 2 bumper case link: https://smile.amazon.com/gp/product/B077T2MSS5?ref=em_1p_0_ti&ref_=pe_2313370_461602280
Outer dimensions of case: depth 11.3 mm x width 73 mm x length 149 mm
I'm willing to customize this mount to fit a few other 5.x inch smart phone and case combinations. Comment below with the length x width x depth of the phone in the case in millimeters. ***Step files uploaded for anyone else that wants to mod the design
My phone, using this mount (printed in nylon), just survived a 600 mile trip with a mix of on road and off road conditions.
** Updated 19 January 2021
Added plate and clip for the Pixel 2 XL with Ringke Bevel case
Outer dimensions of case: depth 10.8 mm x width 80 mm x length 160 mm
Added plate and clip for the Pixel 2 XL with a doubled retaining cap for extra strength when printing with weaker materials (not nylon).
*3/24/2022 I've had success with printing the plate in PETG. Also, I've added a variation on the mount that allows it to be used with the RAM system: https://www.thingiverse.com/thing:5477772
License:
Creative Commons - Attribution - Share Alike
luodanli
