September 28, 2020
Description
I've created this small housing for a BME280 combo sensor. It is made to put it on indoor tabletops but it should work in normal outdoor conditions too.
you will also need:
4* M3 nuts
2* M3 x 36 mm screws
2* M3 x 6 mm screws
2* M3 x 10 mm screws
maybe a little bit glue to fix the nuts in position
cable min. 4 lines (for I2C) or 6 lines (for SPI)
License:
Creative Commons - Attribution
Modellaner
