KP3S Modular Filament on PSU Holder

With this you will be able to mount a spool holder on top of the PSU reducing the footprint of the printer as well as eliminating the spool holder from the top, incase that is what you prefer.

There are two mounting brackets, SLIM and V2. You can decide for yourself which one you are going to print, one is obviously a little more stable due to its size, but even "slim v2" is plenty stable (what I am using after testing both). Additionally, there are also two versions of the "Top Mount Spool Holder", one with a sharper angle to it, again, you can decide for yourself which one of those two you are going to print.

If you haven't printed my KP3S PSU Stand, you are going to need to print two of those to be able to make the power supply stand up.

Infill ranges between 15-25 on all models,
No supports for the kp3s mounting bracket and the stand
Print with supports on the sling and the roller.

Happy printing.

PS: I also added a small version to my tool holder design for the kp3s which can then be combined with this mod to give it even more functionality (as seen in picture 2). V2 of said version is only a faster printing one as I cut off some material.