Hemera(Hermes) CR10 Mount

I designed this as I wasn't 100% pleased with the build area lost by the CR10 Hemera mounts available on thingiverse

This design is intended to be fabricated from 1/8" (3.175mm) thick aluminum, but could be 3d printed as well. It uses some McMaster Carr hardware for mounting 4x 92010A116 and 2x 92010A332.

https://www.mcmaster.com/92010A116/
https://www.mcmaster.com/92010A332/

The mounting bracket would need to be mounted on the gantry first, as the screw access is blocked by the Hemera. A hole is also needed to be drilled through the gantry to access the mounting holes of the Hemera.

I haven't identified a good cooling duct solution, yet. I'll update here when that is solved.