October 12, 2020
Description
As told on Nema17 Reduction thing: https://www.thingiverse.com/thing:4617258
I've recently found a Meade ETX-70 with it's goto mount unusable. So wandering around I found the OnStep project to build my own goto mount.
First of all, I had some spare 3d printer components so I decided to take good use of them. OnStep allowed me to use a Ramps board and a few A4988 stepper drivers. I designed the above mentioned Nema17 reduction gear to solve the low A4988 driver resolution.
With a couple of printed reduction gears, one for each axis, and a few more printed parts included here you will be able to mount your own Meade ETX-70 (or with some modifications your own telescope mount). My telescope has 85mm diameter so modifying the gripper parts you shoud be able to adapt it for similar diameter telescopes.
in addition to the pieces necessary to build the reduction gears I've also used:
See my first tests here:
https://www.youtube.com/watch?v=YmEpXjb6Fo0
Update: Just uploaded my OnStep config.h file.
License:
Creative Commons - Attribution
pribasv
