October 27, 2020
Description
This is a remix of pruban's DAS modular battery holder to accommodate a Tzumi Pocket Juice 10000mAh quick charge battery rather than the much more expensive battery from the HTC Wireless Adapter. The HTC battery runs $60 to $70 online, whereas the Tzumi quick charge battery can be picked up from Best Buy or Home Depot (in my area) for about $30.
You need to print two of the clips and two of the tracks, one of everything else. If you print in transparent resin, use the clip with button hole and you can use it to check the battery status LEDs. If you are not printing in transparent resin, you can just print two of the regular clips. The button hole clip will work with non-transparent prints, but not much point as the button just lights the LEDs, and they'll otherwise be covered by the clip.
Here are a couple of links to the battery I used:
https://www.homedepot.com/p/Tzumi-10-000-mAh-Power-Delivery-Portable-Power-Bank-6587HD/312511946
This is my first remix, so hopefully someone else will find this useful!
License:
Creative Commons - Attribution
byancey
