iPad Air 4 (2020) (with case) Wall Mount Charge station

I designed this wall mount to charge an iPad Air 4.
Its comprised of 3 parts:

1. Frame to house the iPad that is screwed to the wall
2. Cable Base plate, to secure the USB Cable to (i used a cable tie, a shim (also provided) and filled any gaps with a 3d pen - This allowed the cable to remain firmly in place)
3. Cable Cover, to hide the base plate and cable connector.

Shim, optional. I designed it to keep the usb cable centered (its need depends on the cable you use)

Please note that the dimensions of the wall mount assume an iPad Air 4 with a cover.
A cover like this one from amazon was used. (https://www.amazon.com/MoKo-Generation-Lightweight-Translucent-Protector/dp/B08DJ539ZQ/ref=sr_1_18?dchild=1&keywords=ipad+air+4+2020+cover&qid=1604335869&sr=8-18)
If you are using the ipad without a cover this wall charging mount will be too big and you will need to reduce the dimensions slightly.

You will need:

2x M2.5 Screws
2x M2.5 Nuts
3d pen (optional) - to fill in any gaps around usb terminal/cradle