November 6, 2020
Description
I have realized that there is no case for the ELV RPI-RF-MOD case in combination with the HB-RF-USB-2 case, so i made one myself.
Tolerances are quite tight so make sure your printer is well calibrated. Apart from that printin it is easy. No supports etc. required. Bottom took me 2,5h to print, the top 1,5h.
The Top is snap fit.
On the side there is a 7mm hole for an external antenna.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
22
bjoerns1983
