Summary

My Ultimaker S5 is on a workstation top that has shelves at the back. The height of the bottom shelf interferes with the spool mount for the RFID chip reader. It is a fixed in place shelf. This has caused me to have to have it at the front edge of the surface.

These risers go under each corner of the printer and raise it about 1/5 inches to provide clearance for the spool to be above the bottom shelf.

There are two STLs attached, one is for Front Left/Back Right. The other is for Front Right/Back Left. You will see why there are two and not just one when you look at the files. The sides of the printer extend past the front and rear pieces.

Print two of each part.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> Any PLA                 Any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Just print them and put under the four corners. I plan to mount them on a piece of plywood so that they stay in place as a rotate the printer over the edge of the desktop to change filament. The underside of each foot has a cut out that will help lock the foot in place if you use a flexible adhesive like Goop.</p></div>

Ultimaker S5 Risers

Ultimaker S5 Risers

Related Models