Orbiter adapter for Duet Smart effector Delta printers

Orbiter adapter for Duet Delta effector based delta printers.

The adapter is mounted to the efector using:

• 3x 6-10mm M2.5 + 3x M2.5 insert nuts in the adapter (you can use M3 screws and nuts as well but you will need to enlarge the holes in the effector PCB to 3.2mm);
• 2x 10mm M3 nuts + 2x M3 insert nuts in the adapter for mounting the orbiter on top.

Thanks Frank G. for helping and supporting this design.

Join our Facebook support group!

Please be aware that Effector Adapter V5 is optimizer for short filament path and on some printers may restrict the effective print are, the rods will hit the extruder at the print area edges.
Effector Adapter V6 is taller by 6mm and tilted more by 6deg.
Effector Adapter V7 is taller by additional 8mm clearing the rods completely