Electric Mountainboard Motor and Vesc Mount

I am building an electric mountainboard and since I bought a used and unbranded board I had to make all the necessary parts by myself. I made my 10S5P battery already so now is the time to mount the motor and connect it to the vesc. Honestly I thought that 3D printed plastic mounts would break or bend.That is why I used metal reinforcements.And that construction works great! I took my board for several off road rides and the mounts still hold perfectly. However if you want to make those mounts for your skateboard keep in mind that you most likely will have to edit some parts to fit to your truck.I included here all the files in different formats so you can easily edit everything.You can find more details on my channel.

More pictures in better quality
https://cults3d.com/en/3d-model/gadget/electric-mountainboard-motor-and-vesc-mount

YouTube video - https://youtu.be/hwI-GV1nkvw

First Part about Battery Pack - https://youtu.be/ONbf9zvdYfI

Parts list for the mountainboard - https://cults3d.com/en/3d-model/gadget/18650-10s5p-battery-pack-visualization

Parts for Motor and Vesc Mount

-10x M5 70mm screw
-8x M5 Nut
-2x M5 Self-Locking Nut
-2x 12x12x230mm Aluminium hollow square tube
-4x 8x185mm steel rod(I used scratched linear rails from my 3D Printer)
-Some 3M screws
-HTD5M 15t Pulley(You should get one that fits your motor shaft.I bought mine from Flipsky.Use Keyway)
-HTD5M 460x15mm Toothed Belt
-5x M5 55mm screws with nuts(to connect wheel with pulley)

Other things that I used

-Waterproof box YT-08900
-Flysky X6B(PWM output) and FS-I6X
-VESC Tool https://vesc-project.com/node/17

Wiring diagram
https://img.staticbg.com/images/oaupload/banggood/images/C0/09/1301a712-9cbc-4bd4-9299-5eee6e80401c.jpg
You can connect normal PWM receiver to PPM port and motor sensor wires to SENSE port.

My Cults3D profile
https://cults3d.com/en/users/BasementCreations/creations

If you have any questions
[email protected]