Did some minor tweaks to the model, no need to trash the previous one if printed.
RC-1 - 14 November 2020
Do you use FormFutura's, DSM or Mitsubishi Filaments?
You know these are all on cardboard spools with a bore (hole) diameter of 56mm.
The cardboard spools give a lot of friction and or wears down and leaves super tiny particles of cardboard everywhere, like dust... And it's annoying... Well SAY NO MORE!
Print 2 of them and you are eliminating the problem. If it's too tight just press harder, it's not your grandma, it has a very, very snug fit so it won't come off.
Rafts:
No
Supports:
No
Resolution:
0.2mm Layer Height
Infill:
15%
Filament_brand:
FormFutura
Filament_material:
PETG
Chrizz
