Bruder Conveyor servo attachment

This is an attachment for the Bruder Conveyor Belt that allows for a 360 degree servo attachment to make it functional for RC. I have used a full size servo and modified it to do 360 degrees.

To modify the servo:
1- open up the servo and remove any mechanical limits
2- remove the PCB board but cutting or desoldering the two motor leads
3- solder longer wires to the motor leads and add a plug to connect a battery
4- (optional) add a switch inline between the battery and the servo to be able to turn it on and off.

Mount the modified servo to the side of the conveyor with an "L" bracket.