Ender 3 V2 Silent Mainboard Cover

This is a custom Ender 3V2 mainboard cover designed for the use with a 92x14mm fan (e.g. Noctua NF-A9x14 PWM) in conjunction with a 22x7mm step down converter (e.g. MP1584EN).

There are clearance holes for using the fan either in a push or a pull configuration. In both cases, the soldering must be done after the wires have been put through the holes provided.

The cover can be mounted using the original screws only, but in the area where the cable conduit passes the aluminum profile, additional M3 screws in conjunction with t-nuts are recommended.