November 27, 2020
Description
Just a basic enclosure that I knocked up in FreeCAD for my own personal use with a headless Raspberry Pi Zero W but thought I'd share it here as my first upload.
There is enough room in this enclosure to add a small heatsink on the CPU.
I added some air circulation holes too.
Base & Top secured with No.4 x 1/4" self tappers.
No fancy filament, just cheap SUNLU PLA from AliExpress.
The dropdown box does not have my exact printer but it is:
Anycubic Mega Zero
No heated bed on this one but I print on a glass plate with a few coats of PVA brushed on & dried with a hairdryer for adhesion.
Hotend is at 190°C
License:
Creative Commons - Attribution
1CM69
![NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/thumbs/cover/320x240/jpg/212.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg "NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image")
