Summary

These parts should alleviate the need to re-level the bed due to knob migration. Requires an M4 square nut installed on each knob. The foundation should work with springs or silicone spacers, but may require extra pressure against the corners to allow the bed screw to go thru.

Each notch of the knob is roughly equivalent to .25mm or .001" of bed height.

I bought an assorted metric square nuts kit made by Kinpar and sold on Amazon.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40%</p></div></p>                                                    <strong>Filament:</strong> Fillamentum ASA                Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used Fillamentum ASA, but I'm sure any ASA, ABS, or PETG will work fine. I haven't tested PLA because I have a heated bed and didn't want to try it out since I had ASA available.</p></div>

Creality CR-10 Bed Lock Knobs

Creality CR-10 Bed Lock Knobs

Related Models