November 30, 2020
Description
See assembly video:
This is a an outdoor mount for a Wyze cam v3. Since the v3 is waterproof, the enclosure is not designed to prevent water from getting in, but rather allow water to filter out through some holes on the bottom. You will need a single 1/4-20 x 1-1/2 hex bolt.
I printed these in ABS at 30% infill. While some parts require supports, there are some parts that have threads and printing supports on the threads should be avoided. Please see the picture I included with my Cura settings.
You need to print one of each of the following:
camera_enclosure_bracket_with_shade or camera_enclosure_bracket
camera_enclosure
ball_mount_large_end_ball
ball_mount_small_end_nut
ball_mount_small_end
ball_mount_large_end_nut
ball_mount_large_end_ball_hex_cap
camera_enclosure_male_to_male_threaded_screw.stl
base
Check out the assembly video
License:
Creative Commons - Attribution
jplasencia
