December 1, 2020
Description
a Box for 3 mm "Fräser" (Milling Cutter)
up to 25 can be stored.
Hinge is done with a piece of 1.75 mm filament - you might to clean the hole with a 1.8 mm drill so
I did it just quick and dirty with bad filament (change in diameter) and printed my boxes with a 0.6mm nozzle and 0.28 Layer height.
With that set up fits snuggly with the 3.8 version and a little bit easier to remove with the 3.9 version.
License:
Creative Commons - Attribution
PrintBull
