Rail way passenger coach H0

The parts to be printed

2 set black parts (bogie and coupling)
1 green parts (walls)
1 grey parts (roof)
1 big end (one end of chassi)
1 little end (other end of chassi)

Other parts are spare parts.

Assembly

Some support on the coupling needs to be cut of and cleaned after printing.

Glue is not required in theory but may be needed to keep roof and walls together for best result.

When printing the chassi parts some smaller sprints are also printed. 4 of these shall be cut out and put in between the two chassi parts. Once the house and roof is clicked on to the chassi, that should keep the two chassi parts together also without glue/bolts (M2 is the intended bolt/nut size if it is needed).

Windows can be cut out from OH film or similar and slided in between slits between inner and outer walls. Imperfections from printing may need to be cleared out with a thin carpet knife first.

Wheels

We do not print wheels, bought wheels from:
http://www.eskader.se
Märklin wheels

Or cone tip AC:
https://www.mjhobby.se/
MJ-Hobby Västbergavägen 24, 126 30 Hägersten
JE 9950010, AC - hjul

Or cone tip DC:
https://www.ebay.com/usr/evemodel_es
24pcs 1:87 HO Scale 36'' Metal Wheel for Model Train DC Wheels C8724 ( 223567289321 )

Good correct wheels are important or the rail car may derail when it goes thru points.

Adjustments

The bogie may need adjustment. A few 10s of mm can be critical if wheels sit two tight or too loose. If so use OpenScad to edit the bogie.scad file and export new STL files.