December 5, 2020
Description
This spool holder allows to adapt very well coils of any diameter/size (or almost) and to load/unload them very quickly as a 7mm pitch has been used which allows you to go from minimum to maximum in just 8 turns.
The spool holder slides on 3 rings to minimize the contact surface and thus minimize friction. However, it is good to put a little layer of grease on it to avoid squeaks and you will see that it will turn even better, as if it had bearings (watch as work).
Good print!
22/12/2020
I moved the screw inward to be able to mount screws with the larger head
If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.
Thanks to Google Translator for help with translation. ;)
License:
Creative Commons - Attribution
ThorLAB
