Twilight Imperium 4 Organizer (incl. Prophecy of Kings)

This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings.
It is a remix of my previous organizer (https://www.thingiverse.com/thing:4534520), so you can keep the already printed faction boxes and just need a couple more (1x Muaat and 6 regular ones).
The inlay will work with sleeved cards, however, I used rather thin and tight fitting sleeves, so you might want to check that (https://www.docsmagic.de/100-Docsmagicde-Mini-American-Board-Game-Sleeves-41-x-63-Small-US-43-x-65-Brettspielhuellen).

Here's what you need to print:
8x Player: Holds all player colored pieces, cards, and a set of dice. Note: The Warsuns only fit disassembled!
23x Faction: Holds all faction-specific cards, tokens, and the home system.
1x Muaat: It's a deeper version to fit the Muaat Supernova.
24x Faction_Lid: There are 3 versions with different tolerances. I'd suggest print the 0,2mm version and then depending on whether it fits to loose/tight try the others.
2x Res: Holds all trade good/commodity, infantry, and fighter tokens as well as some cards (I put the secret objectives and artifacts in there).
1x System: Holds all regular system tiles (blue back).
1x Hazards: Holds all hazard tiles (red back).
1x Hyperlanes: Holds all hyperlane tiles.
3x Hex_Lid: There are 4 versions with different tolerances. I used the 0,0mm version but you can try which fits best for your printer settings.
1x Cards: This holds the action and exploration cards as well as the remaining tokens.
2x Cards_Single: These hold the agenda and planet cards.

Let me know if you have any questions or comments.

UPDATE
Since there were some comments stating that the faction boxes do not fit into the EN version of the game I can confirm that this is NOT the case! I recently printed it for a friend with the EN version and everything fit perfectly! I printed with a 0.8mm nozzle and 0.6mm layer height. So if you have any issues check the settings of your machine/slicer. Each faction box should be ~13.7mm with the lid closed then it fits without any problems.