Wyze Cam V3 indoor/outdoor adjustable wall mount

This is a an outdoor mount for a Wyze cam v3. Since the v3 is waterproof, the enclosure is not designed to prevent water from getting in, but rather allow water to filter out through some holes on the bottom. You will need a single 1/4-20 x 1-1/2 hex bolt.

I printed these in ABS at 30% infill. While some parts require supports, there are some parts that have threads and printing supports on the threads should be avoided.

Except for the camera mount bracket, for which there are 3 versions, you need to print exactly one piece of each part for a complete assembly. Since the Wyze Cam v3 is water resistant, printing the enclosure is optional, as you can mount the camera to the base without the enclosure. With that said, I do recommend printing the enclosure for additional protection.

Additional Parts:

(1x) 1/4-20 x by 1 1/2" hex bolt
(2x) 1/4-20 nut