This is a simple case for the
Shelly H&T sensor.
One Base is with mounting points for a step down module one is without them.
Both come with a 4mm hole for a USB Cable.
The Shelly H&T twists into the lid like in the original case
As the Shelly H&T only is rated for 3V you should use some type of
voltage regulator!
additionaly needed:
- 4 2.9mm x 9mm screws for the lid
- 2 2.9mm x 6mm screws for the step down module if used
- USB Cable
- Voltage regulator / Step down Module
DirAgAlok
