Case for Samsung Galaxy Tab A7 10.4"

This is a simple flexible case for a Galaxy Tab A7 (10.4") tablet.

Does not require supports.

I provided two versions. One with the hexagon hole pattern on the back and one that is solid. The hole pattern improves grip and ventilation.

This will require a larger print bed as it is 254.5 mm long.

Any flexible TPU should work. I used a common 95A rated one.

There are some steep overhang angles but they can print well if you lower your layer thickness. I printed mine with a variety of layer thicknesses to optimize print time and overhangs. Layers used were .32 to .10 mm with .6mm line width (using a .4 nozzle).

The bridging areas will sag a little depending on your printer and settings. They worked well enough for me.