Ender 5 plus - MeanWell RSP-500-24 support

Hello all out there,

here is my proposale for ender 5 plus power supply.
Hummm no ... In fact, the support is designed for a weanwell power supply RSP-500-24.
It schould fit any 3D printer based on 2020 profile frame.

The support is designed to be placed on a lower left cornet from frame (rear or left)
If another position is needed, may be to mirror the support in CURA could help.

The power switch and power supply plug are reused from printer case.

To assemble all this thing you will need :
6-M4x10 screws for PSU to support
3-M4x10 and 3-M4 t-nuts for support to frame
4-M3x10 wood screw for lid on support
power swith and power plug from printer

The holes for screwing lid maybe to tiny, just redrill them at 2 mm (it depends on printer accuracy)

For the 24VDC cable if the hole under the power supply plug doesn't fit you cable managment, there is enought place te redrill some hole on the side of the support.
Also, you will need some skill in soldering !

If needed, fusion 360 design file si avalaible on demand : just ask for it.

If you like this design : press the like button and/or tip the designer !

Have fun and keep safe.