December 14, 2020
Description
This design has moved over to Printables.com. If you have any comments or questions please post them on Printables.
This is a grippy sleeve for the PB Swiss Tools PB470 5mm hex to C6 bit adapter. It allows you to use the adapter as a finger bit holder to finger-tighten things that are hard to reach or just need a lot of finger control. All while still being able to use it with a 5mm allen key.
The sleeve is friction-fit and sits very tightly. I had to use a hammer. The bore diameter is 10.2mm and the adapter is 10mm wide.
I printed it in PLA with 100% infill. Might also be interesting to use a medium to low flexible TPE filament.
You may tweak it to your printer's tolerances in Onshape. Just change the bore_diameter variable.
License:
Creative Commons - Attribution - Share Alike
6d6178
