Cyberpunk 2077 - Tsumani Defender Remix with STP files! WIP

https://www.thingiverse.com/thing:3820754
Thanks to ra100 for Pernisson to use this and create a Remix!

Update:

1.0a
The Slider Works!
Seems good atm!
You can print and assemble it.

1.0
Changed the Slide (compatible with 0.9 files)
I couldnt print it because it doesnt touched the print plate

0.9
Reworked some issues.
The gun should be now easly printable.
(iam Printing atm)
Seperated the gun another time. So you could print the handle in diffrent colors
Renamed everytrhing to proper english.
Added TPU Rubber for the mechanics
The barrelthread still dont exported correctly. i have no idea why its not working.
But you can cut it open.

0.7a Infoupdate:
Printed all parts. Its ultra klingy to assemble the gun.
Uploaded new pics.
The slide isnt sliding anyways. Need more space.
Back to the blueprint...

0.7
updated alignment of parts
the bore wouldnt fit in the slide.
Seems good so far.

0.6
Redone some things. Actually printing this Version now for testing
I have an idea for the magazine unlocking but need to be drawn :D

0.5
Changed some thins which doesntworked.

0.4
Printing was okay but the slider doesnt slide.
Updated the slidemech

0.3
The Parts Main left and Main right wasn't printable with an 0.4mm nozzle

0.2
Added last missing part for the sleight.
(old one still usable)
Nozzle changed

0.1
Main left and Main right collided with the magazine unlocker.

WIP NEVER PRINTED

Its a Remix with STP files instead of Mesh from
Thingiverse wouldnt let me call the Master file.... Site is buggy

https://www.thingiverse.com/thing:3820754
Thanks to ra100 for Pernisson to use this and create a Remix!

The milestone is to make it simple to print it.
There is much much potential to optimize the parts.

I never tested the mechanics.
This will now take some time to print everything.
Things may get changed. (like the trigger which will be seperated in 3 parts)
But after 40h of construcion i need a break.

The trigger is usuable aswell the finger pin?? (idk what its called)

Mag mechanics.
M12 Thread in front for addons like suppressor.

I have no clue if the material will work as spring.
No screws or springs needed!.

You should need very less supports. make sure your bridging is working good.
in the main parts are 2mm holes for fitting and glueing.
The grips are seperated for fuzzy printing.