Armrest Toyota GR Yaris

Put padding on top of the sliding armrest and cover with leather or fabric.

• 2pcs M6 x 40 (max 50) for the hinge

• 4pcs M4 x 40 for the sliding piece

• 4pcs 5,3 x 20 washers for the screws holding the sliding piece

• Outer walls/perimeters: at least 3

• Layer height: 0.3mm (it takes a looooot of hours to print all parts even at that height)

• Infill: 15-20% works fine

• No supports

https://www.youtube.com/playlist?list=PLyJjY3xL9fgz-PqQDJ7FIqQcfAfLj0LqI

https://gr-yaris.co.uk/forum/threads/howto-3d-print-your-own-armrest.551/