For the regular iPhone 6, 6s, 7, 8 and SE 2020, see
this. This case was designed using as reference the iPhone 6S Plus, and a commercial case, that was compatible too with the iPhone 6 Plus, 7 Plus and 8 Plus. It was tested only with the first one, as it was the only one I had available to test, if this case does not fit correctly on any of the other phones, please, notify me and I will try to correct it, or remove its compatibility.
Some of the models are designed for rigid materials and others for flexible ones.
The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.
2021 is the year when most of country started the covid-19 vaccination; that's why I added a design with the 2021 with the "0" as a virus silhouette and the "1" as a syringe.
For other phone cases check
this.
Here is the explanation of the files names:
- Flex: made for elastic filaments like TPU. Tested on TPU the 7 Plus (thanks Marcelo Saiz).
- Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA and PETG with the 6S Plus.
- Aired: It is widely opened in the back so that the phone can dissipate the heat easily.
- Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.
I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me here:
tato_713
