Ortur LaserMaster2 AirAssist LaserMount (for nozzle mount)

This is a air assist mount, designed for the Ortur LaserMaster 2.
Might also fit to different brands with same laser (40mm width).

This mount is meant to be fed by a 6mm tube, which can be sourcing from a airbrush compressor or a air pump for fish tanks. By reducing the exit hole to 1mm or little bit larger, the air gets a nice pressure to work as simple air assists for the kind of laser it is designed for.

Similar to the version "Ortur LaserMaster2 AirAssist LaserMount"
https://www.thingiverse.com/thing:4705764
.. this version has an 6mm opening, which can be used to mount (screw in with litle force) a 3d-printer nozzle of 6mm screw with, and for example 1mm exit hole, or smaller.
(I personally did test it with a 1mm nozzle, smaller might for the pump to work rader, or air flow can be reduced instead).

This is my way to contribute to the laser cutting/engraving community, with a simple solution for simple tasks. It should help for both laser cutting and engraving to get better results and to avoid pollution for the fumes toward the laser lens.

I hope someone can find it helpful :-)