Chess Set ( Board / Pieces / Box )

[ Design Concept]

• The chess pieces design was inspired by the following references: https://www.thingiverse.com/thing:4181010
• All modeling, including detail and size, was built from scratch.
• It is designed to be assemblyable and can be printed in 200x200 sizes.
• It is recommended to use glue if the assembly is not tight.
• It can be made in two or three colors.

[ Tools and Materials ]

• Modeling with Rhino 3D
• Slicing with Simplify 3D
• Printing with Plus 200
• Using PLA in 3DMaterials, Black, White Marble, Gray

[ Setting ]

• All parts are based on a 0.3 mm offset for assembly
• No Raft, No Support, Use Skirt or Brim
• Infill 10~20%
• Layer Height : Pieces 0.1 mm, Others 0.2 mm

[ Object ]

1. ChessBoard_Top(Black).stl

• Color : Black
• Infill : 10%
• Layer Height : 0.2 mm
• Time : 10 H

1. ChessBoard_Bottom(White).stl

• Color : White
• Infill : 10%
• Layer Height : 0.2 mm
• Time : 20 H

1. ChessBoard_Base.stl

• Color : Gray
• Infill : 10%
• Layer Height : 0.2 mm
• Time : 10 H

1. ChessTile_0.3mm offset(Black, White, needed 32EA).stl

• Color : Black 32 EA, White 32 EA
• Infill : 20%
• Layer Height : 0.1 mm
• Time : 6 H(Total)

1. Chessmen(Black, White).stl

• Color : Black 1 EA, White 1 EA
• Infill : 20%
• Layer Height : 0.1 mm
• Time : 12H(Total)
• Horizontal size compensation 0.2 mm

---

[ Update History ]

• 02 - Jan - 2021 : First updated
• 04 - Jan - 2021 : Chessmen print setting added (Horizontal size compensation 0.2 mm)