Summary

I needed a 6 pin Jones connector for a retro electronics project, so I decided to design and print one instead of looking for one in an electronics surplus store. This design prints the connector body into which one inserts pins made from copper sheet. It also makes a backshell to prevent the user from coming in contact with the connections when mating or demating the connector.
It was designed using OpenSCAD and one sets the variable phase to 1 to generate the connector body and 2 to generate the backshell (or cover).

Print Settings

Printer Brand:

Deezmaker

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Bukobot V2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.4mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> Matterhackers MHBuild PLA                Red

Six Pin Jones Connector Body and Backshell

Six Pin Jones Connector Body and Backshell

Related Models