Lost Ruins of Arnak - Board Game Insert Organiser

Lost Ruins of Arnak Insert Organizer

• Support Vertical and Horizontal storage keeping all components in place.
• Fits Fantasy Flight Supply sleeved cards, so it should fit most sleeves

This was designed with the goal of speeding up set up and tear down. The card trays, Assistant tray, Level I/II Guardian Tile tray, Temple Tray, resource trays, compass/money trays can all be taken out of the box and placed directly on the game boards

This design requires you to print;

2 x Resource Trays
2 x Money Trays
2 x Compass Trays

Putting the resources and components in multiple trays allows you to spread out the components for easier access to the players which comes in handy when playing with larger groups.

You will also need to print the player tray 4 x's

This was a tough one to get right as there are multiple boards, score pads, etc.... of various shapes. Ended up having to create a base to fit all the boards and scorepad etc..

If you store your games horizontally you can save some filament and not bother printing the base components. You can just store the boards and score pad on top of the various trays.

I have included three versions of the base component.

1. PRINT BEDS Smaller than 250mm

• You will need to use the following files to print the base layer.

• I also had to break up the tray that holds the Level I / II and Guardian Tile Tray into two parts

• Unlike the picture these files split the base up into 4 pieces.

• Each of the 4 base pieces measures 124.25mm x 178.5mm

• Base Layer File Names for smaller Print Beds

LR-1-4-BseBL
LR-1-4-BseBR
LR-1-4-BseTL
LR-1-4-BseTR

• The Level I / II and Guardian Tile Tray is broken down into 2 parts for smaller print beds, the file names are as follows, print one of each;

LR-I-II-Grdn
LR-II-Sml

1. PRINT BEDS larger than 250mm

• You can use the 2 piece base layer files.
• Each of the 2 base pieces measures 248.5mm x 178.5mm

File Names

LR-BaseLftSide
LR-BaseRtSide

1. PRINT BEDS larger than 360mm,

• You can choose to print the base layer all in one piece.
• The 1 piece base measures 357mm x 248.5mm

File Name

LR-Base1pc

Feel free to ask any questions, I will do my best to reply