Summary

Sovol SV01 Spool & Sensor holder all in one.

The position of the reel holder did not convince me nor the position of the filament sensor. So I thought of creating a single holder that would allow me to rotate the reel holder 90 ° and to position the sensor in front, aligning with the extruder.
I'm getting along well now with this solution. In addition, I raised the sensor position by 20 mm so that at the maximum height (300 mm) the extruder does not touch the sensor.
I will accept any advice to improve this project. Thanks.

Used EU20-M4 × 10 × 6

+++UPGRADE+++
V2: for better routing of the filament sensor cable: use it!

Print Settings

Printer:

Sovol SV01

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.20</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> Giantarm PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Extr Temp: 205°<br>Bed: 60°</p></div>

Sovol SV01 Spool & Sensor holder all in one

Sovol SV01 Spool & Sensor holder all in one

Related Models