Swiveling Drum Clamp

I designed this to clamp a 15 mm "support rod" to the 35 mm leg of an Alexis Nitro Mesh kit. The centre bolt can be loosened with a hex wrench to allow you to change the angle (can't be adjusted while attached to the 35 mm leg). The swivel has 15° increments.

Assembly is with four 20mm M5 bolts with socket head caps and an M5x16 mm centre bolt. There is space for a washer under the bolt heads.

Need to always print one L file and one R file or they won't connect.

2021-04-15 update added L20 and R28 mm sizes